Kore Essentials 1.5" Multicam EDC/CCW Belt

Kore Reinforced Every Day Carry belts are the most adjustable, supportive, comfortable belt you will ever wear. They provide a precise, secure fit - so you get a smooth, fast draw every time.

• Virtually indestructible, hidden ratchet track with 40 size adjustments. Precisely adjust your belt in 1/4” increments for a perfect fit.
  
• Proprietary Reinforced Power-Core™ centre. Sturdy and stiff enough to support a firearm and gear (up to 4.5kg total weight) without sag; flexible enough to sit, walk, or move in all day.
  
• Belt Keeper to keep the belt tip flush with your pants.

To trim your 1.5" EDC/CCW Belt or 1.75" Garrison Belt to size, follow the instructions or video below. 

1. On the back of the belt, use the ruler markings to find your pant size. 

2. Add 4 inches for OWB carry, or 6 inches for IWB carry to your pant size. Cut on the mark using a sharp pair of scissors. For example, if your pant size is 34" - cut the belt at the 38" mark for OWB carry, or 40" for IWB carry. If your pant size is close to the maximum size marking DO NOT CUT! Try the belt on first, then trim accordingly.

3. Loosen (don't remove) the 2 set screws on the back of the buckle with included allen key. Insert the cut end of the belt into the receptacle with teeth.

4. Clamp teeth down firmly and gently tighten the 2 set screws on the back of the buckle until they sit flush. Use caution to ensure the set screws are not overtightened or stripped. DO NOT TIGHTEN SET SCREWS UNTIL THE TEETH ARE FULLY CLAMPED DOWN!

5. Feed belt around waist (L to R), through the buckle and click until snug. The tip of the belt should extend around 3 inches beyond your first belt loop. 

*If you accidentally remove the screws entirely, ensure they're reinserted correctly by turning them counter clockwise until you feel a click. This is the screw's thread seating correctly. Then, begin to tighten the screws normally.

• Belt Width/Thickness: 1.5” / 5mm
• Load Rating: Up to 4.5kg
• Size Range: Fits  24" - 54"
• Buckle Material/Finish: Alloy / Powder Coat
• Buckle Size/Weight: 2.5" x 1.75" / 114g
• Adjustable Track: Provides over 40, ¼” size adjustments
• Belt Reinforcement: Power-Core™ centre for added stiffness and support - virtually indestructible.
• Belt Material: Nylon / Super-Fibre Inner
• Compatible: X-Series Gun Buckles compatible with 1.5" Gun Belts (tactical nylon, leather, buffalo leather, executive protection.
• Not Compatible: 1.75" Garrison Belts, Battle Belts, or Non-Gun Belts

• X10 Black Buckle (dealer exclusive)
• Tactical Nylon Gun Belt 1.5"
• Tip Keeper
• Hex Wrench & Set Screws

Kore Essentials: 1 year manufacturer's-defect warranty; 30-day money-back guarantee (uncut, original condition and packaging, minus shipping cost)

Airborne Customs: Whatever the Australian Consumer Law tells us it is. If something you buy fails to meet a consumer guarantee, contact us and we’ll sort it out. To learn more about your rights under Australian Consumer Law, click here to go to the ACCC’s website.