Kore Essentials 1.5" Competition Belt
Kore Essentials 1.5" Competition Belt
The world’s first micro-adjustable competition-shooters belt. Simply put, this is the best fitting, best built competition belt you’ll ever wear.
Perfect for USPSA and IPSC events. However, Kore's competition belt (outer belt & inner belt) is not permissible for IDPA matches. IDPA regulations require that belts pass through at least 2 belt loops. In this case we recommend using just the stiff 1.5" outer belt, which can feed through 2 or more belt loops, or Kore Essentials 1.5" EDC/CCW Belts.
Features
Features
- Virtually indestructible, hidden ratchet track with 20+ size adjustments. Precisely adjust your belt in 1/4” increments for a perfect fit.
- Proprietary Reinforced Power-Core™ centre. Sturdy and stiff enough to support a firearm and gear (up to 4kg total weight) without sag; flexible enough to sit, walk, or move in all day.
- Padded inner belt, compatible with all Kore dual-belt systems.
- Belt Keeper to keep the belt tip flush with your pants.
Included
Included
- C1 Black Buckle
- Black Competition Belt 1.50"
- Padded Reinforced Inner Belt 1.50"
- Tip Keeper
- Sizing Tape
- Hex Wrench & Set Screws
- Sizing instruction manual
Specifications
Specifications
- Belt Width/Thickness: 1.50” / 7mm inner; 7mm outer
- Load Rating: Up to 4kg
- Size Range: Fits 24" - 48"
- Buckle Material/Finish: Zinc Allow / Powder Coat
- Buckle Size/Weight: 2.50" x 1.75" / 125g
- Adjustable Track: Provides over 20, ¼” size adjustments.
- Belt Reinforcement: Power-Core™ centre for added stiffness and support - virtually indestructible
- Belt Material: Scuba-webbing outer; Reinforced Power-Core™ Centre; Super-Fibre Inner
- Compatible: Not compatible with other buckles.
Warranty
Warranty
Kore Essentials: 1 year manufacturer's-defect warranty; 30-day money-back guarantee (uncut, original condition and packaging, minus shipping cost)
Airborne Customs: Whatever the Australian Consumer Law tells us it is. If something you buy fails to meet a consumer guarantee, contact us and we’ll sort it out. To learn more about your rights under Australian Consumer Law, click here to go to the ACCC’s website.
19 in stock
Couldn't load pickup availability
Sizing Instructions
To trim your Battle Belt, Competition Belt or Executive-Protection Belt to size, follow the instructions or video below.
1. Size Outer Belt Line up the measuring tape next to the outer belt, find pant size on measuring tape & cut on the mark. For example, if your pant size is 36", cut the outer belt at the 36" mark.
2. Size Inner Velcro Belt Line up the measuring tape next to the inner belt, find pant size on measuring tape, subtract 1" & cut the inner belt at the mark. For example, if your pant size is 36", cut the inner belt at the 35" mark.
3. Attach Buckle to Outer Belt Back out (don't remove) the 2 set screws on the back of the buckle, insert the cut end of the outer belt into the buckle receptacle, clamp teeth down firmly & gently tighten the set screws until flush. Do not over tighten or force the set screws.
4. Try Belts on for Size First, feed inner belt through your belt loops, attach the 2 velcro sides of the inner belt & center the hex material section over your zipper. There should not be any velcro belt visible behind the 4" hex material section. If there is, remove & trim off that amount.
Next, place the buckle on the right edge of the hex material section & attach the outer belt around your waist overtop the inner belt. Feed the tip of the belt through the buckle & pull snug. Use the included tip keeper to secure the tip of the belt.
5. Final Step If you can't make your belt tight enough, it's too long. Remove the outer belt & buckle, then cut an inch at a time until ideal fit is reached. Last, singe or trim excess fibres from the cut end of
the inner velcro belt & attach metal clip to the cut end of the inner belt.
*If you accidentally remove the screws entirely, ensure they're reinserted correctly by turning them counter clockwise until you feel a click. This is the screw's thread seating correctly. Then, begin to tighten the screws normally.
Battle Belt Setup Tip: Bend the outer belt slightly backward to open up MOLLE for easy gear installation.
Let customers speak for us
from 91 reviewsGreat product. Greta service.
Great holster, fits like a charm and feels very sturdy. Also worth mentioning how great the customer service is, I’m in the U.S. so I had to message Airborne Customs to get an invoice and they responded within minutes. I’ll definitely be buying from them again.
Effective treatment of a corrosion-affected barrel on an antique single-shot 22LR rabbiting rifle.
Good communication and prompt service. Good product. Will definitely be buying more.
Very high quality, good fit
Extremely satisfied with the holster and the delivery speed. Great company to buy from.
Great holster!! Zero adjustment required, fits the pistol really well with solid retention. Really like the adjustable clip for belt width. Leg strap is at the perfect level and the most important part of any holster, is it looks really cool! Most certainly going to buy another one for my other pistol.
Perfect fit. Love it!
After speaking with Airbourne Customs to confirm that my model would fit their holster and taking their advise on the best holster mounting,I placed my order.
The holster is a great fit and feels very natural to remove and holster without looking for the opening.
I would recommend Airbourne Customs to anyone who is having trouble finding a good fit for their model.
Works very well.
Exactly as Described. Strong and secure with great range of adjustment.
Great bit of Kit.
Works well with the Holster Rig, with the right amount of drop for a clean draw.
Great piece of Kit !
Excellent Fit to standard 1911 Magazines.
Well manufactured product to exacting tolerances.
Very Happy!
The holster is exactly as described ! Manufactured using quality materials. Fits my 1911 perfectly. The Tek-Mount Reciever and Disk ensure proper alignment and cant for drawing and re-holstering with zero movement !
Very happy with my airborne customs holster, it is very well made and my steth arms platapus fits great. The adjustable retention works well. Awesome to see a top quality product that's made in Australia 👍👍👍👍👍