Kore Essentials MOLLE Battle Belts
Kore Essentials MOLLE Battle Belts
The world’s first micro-adjustable battle belt. The ultimate reinforced battle belt for range training, security professionals, law enforcement and military personnel.
Kore’s innovative, patented dual-belt system (outer & inner belt) is micro adjustable and unlike any other MOLLE operator belt. A hidden track sewn into the back of the belt lets you adjust your gun belt size – tighter or looser - in ¼” increments, for the perfect fit all day.
Features
Features
· Virtually indestructible, hidden ratchet track with 20+ size adjustments. Precisely adjust your belt in 1/4” increments for a perfect fit.
· Proprietary Reinforced Power-Core™ centre. Sturdy and stiff enough to support a firearm and gear (up to 9kg total weight) without sag; flexible enough to sit, walk, or move in all day.
· Can adjust while running, sitting, swimming or even crawling! No more having to remove or undo your belt buckle to make adjustments.
· Padded inner belt, compatible with all Kore dual-belt systems.
· Belt Keeper to keep the belt tip flush with your pants.
Included
Included
- B2 Black Buckle
- MOLLE Battle Belt 1.75"
- Padded Reinforced Inner Belt 1.50"
- Tip Keeper
- Sizing Tape
- Hex Wrench & Set Screws
- Sizing instruction manual
Specifications
Specifications
Belt Width/Thickness: 1.75” / 7mm inner; 7mm outer
Load Rating: Up to 9kg
Size Range: Fits 24" - 48"
Buckle Material/Finish: Zinc Allow / Powder Coat
Buckle Size/Weight: 2.00" x 2.50" / 156g
Adjustable Track: Provides over 20, ¼” size adjustments
Belt Reinforcement: Power-Core™ centre for added stiffness and support - virtually indestructible
Belt Material: Nylon-web outer; 2 rows of MOLLE; Reinforced Power-Core™ Centre; Super-Fibre Inner
Compatible: All B-Series Gun Buckles
Warranty
Warranty
Kore Essentials: 1 year manufacturer's-defect warranty; 30-day money-back guarantee (uncut, original condition and packaging, minus shipping cost)
Airborne Customs: Whatever the Australian Consumer Law tells us it is. If something you buy fails to meet a consumer guarantee, contact us and we’ll sort it out. To learn more about your rights under Australian Consumer Law, click here to go to the ACCC’s website.
Low stock: 1 left
Couldn't load pickup availability
Sizing Instructions
To trim your Battle Belt, Competition Belt or Executive-Protection Belt to size, follow the instructions or video below.
1. Size Outer Belt Line up the measuring tape next to the outer belt, find pant size on measuring tape & cut on the mark. For example, if your pant size is 36", cut the outer belt at the 36" mark.
2. Size Inner Velcro Belt Line up the measuring tape next to the inner belt, find pant size on measuring tape, subtract 1" & cut the inner belt at the mark. For example, if your pant size is 36", cut the inner belt at the 35" mark.
3. Attach Buckle to Outer Belt Back out the 2 set screws on the back of the buckle, insert the cut end of the outer belt into the buckle receptacle, clamp teeth down firmly & gently tighten the set screws until flush. Do not over tighten or force the set screws.
4. Try Belts on for Size First, feed inner belt through your belt loops, attach the 2 velcro sides of the inner belt & center the hex material section over your zipper. There should not be any velcro belt visible behind the 4" hex material section. If there is, remove & trim off that amount.
Next, place the buckle on the right edge of the hex material section & attach the outer belt around your waist overtop the inner belt. Feed the tip of the belt through the buckle & pull snug. Use the included tip keeper to secure the tip of the belt.
5. Final Step If you can't make your belt tight enough, it's too long. Remove the outer belt & buckle, then cut an inch at a time until ideal fit is reached. Last, singe or trim excess fibres from the cut end of
the inner velcro belt & attach metal clip to the cut end of the inner belt.
Battle Belt Setup Tip: Bend the outer belt slightly backward to open up MOLLE for easy gear installation.
Let customers speak for us
from 60 reviewsHolster and 3x mags carriers for taurus tx22 are great. Took them for a test run and all working well. Sam was also quite helpful and responsive.
Very happy with this holster. It is just what I needed to allows for me to become holster qualified.
Holster appears to be well mad materialis thinner then I am used to but strong and firm woth no play.
The screws on the side allow for tight ingot using the retention.
Stickers card and little touch shows they care for my business and put effort into there work
More like this in Australia plz
Kind regards
Very good belt.
Fit my beretta mags perfect. Along with my HK mags.
I have received it and am yet to use it at the pistol range.
It seems to fit okay and I will carry out minor adjustments on the range.
The belt is extremely well made, easy to cut to size, clear instructions. Both inner and outer belt are easy to adjust and the MOLLE webbing is very practical. Highly recommended.
Amazing quality perfect fit!!
Very happy with the quality of products and customer service.
I've got about 6 different holsters from Airborne now and I've been happy with every one of them. Great communication, good service and an excellent product.
Amazing work guys. Absolutely love the new holster for my CZ. Thanks!
perfect
Quick post. Great fit for pistol. Looks good.
Used it at the range for the first time on Sunday, the holster performed well, holding the firearm securely.
Firearm is a Beretta 87T with a rail mounted optic sight.
Holstering was a bit fiddly though, the firearm needed some wiggling to get it to seat properly but hopefully it will wear in over repeated use.
Awesome looking holster, Sam and team do great work. Easy to deal with.